How to Use Our Dumpster Weight & Load-Limit Calculators by Size

Every one of our rentals includes **2 tons — 4,000 lbs — of disposal**. Volume almost never decides a job; weight does. Our calculators exist so you know which side of that line you're on before delivery day, not after the landfill scale.

Start with the size question If you're not sure a 16-yard roll-off is the right bin, run the [dumpster size calculator](/dumpster-size-calculator) first. It converts rooms, roof squares, and pickup-truck loads into yardage. A 16-yard bin is roughly 6 to 8 truck loads — a garage cleanout, a kitchen and bath remodel, or a single-layer tear-off on an average North Texas house.

Mixed household and remodel debris — the weight calculator Use the [dumpster weight calculator](/dumpster-weight-calculator) for cleanouts, furniture, drywall, cabinets, decking, and general junk. Rough real-world numbers it works from:

• Household junk and furniture: about 150–200 lbs per cubic yard
• Drywall and plaster: about 500 lbs per cubic yard
• Lumber and decking: about 300 lbs per cubic yard
• Wet yard debris: heavier than it looks, especially after rain

A fully loaded 16-yard bin of light household debris usually lands **well under** 2 tons. That's why most cleanouts never see an overage.

Roof tear-offs — the shingle calculator Roofing is where the 2-ton line actually gets crossed, so it has its own tool: the [shingle weight calculator](/shingle-weight-calculator). Enter your square count and layer count. Working numbers:

• 3-tab shingles: roughly 250 lbs per square
• Architectural shingles: roughly 350–400 lbs per square
• Two layers doubles the weight, not the volume

That puts about 16 squares of 3-tab or 10–11 squares of architectural at the 2-ton mark. Our roofing dumpster guide covers staging the bin near the drip line.

Concrete, brick, dirt, and tile — the concrete calculator Heavy debris is measured by area and thickness, not by how full the bin looks. Use the [concrete weight calculator](/concrete-weight-calculator). A 4-inch slab runs roughly 50 lbs per square foot, so **about 80 square feet hits 2 tons** — the bin will look barely used. That's normal and it's why we ask about heavy material at booking. Details in [concrete, dirt & brick disposal](/blog/concrete-dirt-brick-disposal-dumpster-north-texas).

What happens if you go over Nothing hidden. Overage is billed at the same per-ton rate the landfill charges us, itemized on the invoice, with no markup — the same promise as the rest of our [flat-rate pricing](/pricing): $300 for 1 day, $375 for 3 days, $415 for a week, $715 for a month, delivery, pickup and 2 tons included.

Loading affects weight, too Spreading heavy material across the floor of the bin instead of piling it in one end keeps the load legal for the truck and easier to haul. See [how to load a 16-yard dumpster](/blog/how-to-load-a-16-yard-dumpster), and check [what can't go in a dumpster](/blog/what-cannot-go-in-a-dumpster) before you start.

**Ran the numbers and still unsure?** Call or text **903-449-2818** with the debris type and we'll size it with you, then reserve your date.